Car Exhaust Tip Single / Dual Outlet Stainless Auto Muffler Tail Pipe Car 1.5L-2.2L

Characteristic:

Suitable for 1.5-2.2L models with straight exhaust pipe.

Universal exhaust tip, suitable for Most models with an exhaust pipe diameter of 5.3-3.8cm / 2.09-1.50- ".

Specification:

Stainless steel material: stainless steel

Determine if the tip is suitable:

The inside diameter of the tip entry is 63mm / 2.48 ".

Measure the outside diameter of the car exhaust pipe. It can be used if it is less than 58mm / 2.28 ".

Installation method:

Screw connection

Loosen the exhaust pipe bolts and put the exhaust tip in the proper position of the car exhaust pipe, and then tighten the bolts with a wrench.

It only takes 5 minutes to do it yourself!

Attention:

1. The distance between the tip and the bumper should be at least 2cm to avoid scalding the bumper due to the high temperature of the exhaust gas.

2. Wear gloves when installing to avoid serious injury.

3. When the car has just stopped or started, please do not install this product to avoid burns from the exhaust pipe.

Note:

1. There may be slight deviations in size due to manual measurement, different measurement methods and tools.

2. The picture may not reflect the actual color of the item due to different photography light, angle, and screen monitor.